What did one eye say to the other eye? “Between you and me, something smells!”   So here goes, another post. Strap on those chaps and hold tight we’re going […]

In class our assignment was to ask a professor on campus for a prop needed to help teach their class. My professor asked me to make her a bacteriophage. I […]

For 3D printing, we were asked to create an action figure with the following criteria: 1) There must be a total of at least 9 articulated joints in the action […]

Description: We were all given the assignment of designing a 3D printed prop for an educator of our choice here at UNH Manchester. I chose my chemistry lab instructor, who […]

For 3D printing, we were asked to create a teaching prop that was 3D printed using Fusion 360. Design time: ~8 hrs | CAD Software: Fusion 360 Print Software: Cura […]

For this project we were tasked with the objective to create a prop to be used by a professor of our choice from the UNH campus. I ended up with […]

This week, our class created different educational props that could be used in class by our professors here at UNH Manchester. We had a bit of time to find a […]

For 3D printing, we are making an action figure that needs to have 9 joints, one of the joints needs to be printed separately and snapped into place. This is […]

For 3D printing, we are making an action figure that needs to have 9 joints, one of the joints needs to be printed separately and snapped into place. This is […]