The Pentagon

Inspiration –

The inspiration for this piece came from my search to find deeper meaning in everything. I always try to look at things in different ways, and try to think of them as both simple and complex. I feel like The Pentagon in Washington, DC is a good representation, as it could be viewed as just a large pentagon with some hole in the middle, but it also a very important building in the U.S., as it is the headquarters of the United States Department of Defense.

Original Picture taken from Google Maps.
Final Sketch from Fusion 360
Finish Project in Fusion 360

Process –

I took an image of the top of the pentagon from google and sketched the outline of the pentagon and I outlined the holes I would make through the pentagon. I then took a side picture and created that outline. I then extruded up to create the Pentagon, cut out the holes, and then mirrored , and created a circular pattern around the pentagon.

Printer Settings –

  • Layer Height – 0.2 mm
  • Support – Off
  • Adhesion – None
  • Time to Print – 2 hours and 53 minutes
  • Type of Filament – eSun Colors: Pearl White
  • Amount of Filament – 22g
  • Infill Percentage – 20%

Link to Thingiverse –

https://www.thingiverse.com/thing:3896866

Technical Drawing –

Leave a Reply