For this project we are tasked with creating a action figure with 9 move able joints. The first design is to make a working move able joint that will be used for the future project.
First we started with a center circle and revolved the circle to become a perfect sphere.
We inserted an offset plane and created a cross to extrude into the design.
Then we inserted an offset plane to create yet another circle to be able to extend the ball joint for future projects
STL file: https://www.thingiverse.com/thing:3280383
Layer height .2mm
Infill density 20%
Nozzle size .4mm
Bed temp 60C