For this project we were required to create a “sketch” from an image we found on google.
Once I found the image and inserted it into Fusion 360 I began to trace it with the “line” feature.
Once the sketch was traced I placed a center point circle around the sketch. I then cut off segments to add a uniform design on the circle.
I then added annother center point circle and raised the design so it can have a base to be printed on.
STL Files: https://www.thingiverse.com/thing:3174779
Layer height .2mm
Infill density 20%
Nozzle size .4mm
Bed temp 60C