For this project we were required to create a “logo” from an SVG file. First I googled SVG images. Once I found what I wanted to use i imported it onto Fusion 360
After the file was inserted, I created a border for the Logo. After the logo was put in place I used the “Extrude” funtion to allow the logo to become become a printable object.
When the logo was extruded I created multiple bodies for to be able to print the final piece in black and white.
STL File: https://www.thingiverse.com/thing:3174787
Layer height .2mm
Infill density 20%
Nozzle size .4mm
Bed temp 60C