Puzzle Cube

Print Setting


Layer Height : 0.2 mm

Infill Density : 20%

Support : Yes

Nozzle Size : 0.4 mm

Nozzle Temperature : 200 C

Bed Temperature : 60 C


I created a 3x3x3 puzzle cube in class and it took me about 1 hour to make a whole piece on Tinkercad. The puzzle cube contains 27 cubes and 5 pieces and each piece is made up of 4 to 6 cubes. When I started I changed my snap grid to 5.0mm from 1.0mm. Then I dragged a cube set it on a line and then duplicated it and I started to put it together by duplicating it for 5 times. After that I selected all the cubes and hit the group button to group them all so that they won’t be separated and the printer would just print separate pieces. Once I was done creating all the pieces and grouping them all I had aligned them and made sure it was a 3x3x3 puzzle cube and each pieces had 4 to 6 cubes and that all of them were different colors. https://www.thingiverse.com/thing:3095028/files


Step 1


Step 2

Step 3

Step 4

Step 5

Leave a Reply

Your email address will not be published. Required fields are marked *